Fluitek Filters

Absorption elements (filters) are designed to remove water or a specific chemical from fuel, solvents, and oils.

The Fullers Earth is used to adsorb soluble contaminants such as gums, resins, waxes and acids from fuels, oils and solvents.

Fluitek's air intake elements were developed for the removal of atmospheric dust or particulate in the air intake system of compressors, blowers, vacuum pumps, engines, etc.

Over 300 models of air/oil separator elements are available utilizing a cylindrical or pleated design of microglass with a variety of flanges, gaskets and kits.

Liquid filtration bags are commonly used as an inexpensive solution for the removal of bulk solids from applications such as coolant filtration, ink filtration, paint strainers, and various water pre-filter applications.

Compressed air filtration is one of the most common and most critical forms of filtration in the industrial market.

Fluitek's coalescer and separator elements were designed specifically for the separation and removal of water from gasoline, aviation fuel, kerosene, and diesel fuel.

Fluitek offers a complete line of compressor filters including air intake, lube oil, and air/oil separators.

Depth elements are used in low flow filtration systems such as applications containing soft contaminants, sludge, slime, or waxes.

Fluitek dust collector elements are available in all of the current designs used in the industry. Sewn bags, cartridges, and pleated bags are some of the most popular types of dust collectors.

Fluitek hydraulic elements are used for the removal of fine and granular contaminants in critical filtration applications.

Fluitek's all metal elements are designed for the removal of hard, course contaminants from applications including plastic extrusion, oils, fuel, solvents.

Panel filters are commonly used on intake and exhaust applications. This product line is offered in several medias.

Pleated Media Elements are ideally suited for removal of hard, granular contaminants from lubricating oils, hydraulic oils, fuels and water.

Fluitek offers several types of process cartridges. Wound, pleated, melt blown, and resin bonded are a few of the many process cartridge options that we have available.

Radial Fin Elements are extended area, star-shaped elements developed for the removal of atmospheric dust from the air intake of compressors, blowers, and engines and for the removal of hard contaminants from hydraulic fluids, lubricating and fuel oils and process fluids.

Spin-on elements are disposable elements in a self contained metal housing. These elements are used for the removal of contaminants from hydraulic oils, coolants, lube oils, fuels, water, and reservoir tank air breathers.

Wound Elements are used in the filtration of liquids and gases containing small particulates or limited soft contaminants. These elements are used in a broad range of industrial, chemical and process industries.